Contec SP100B 攜帶式肺功能檢測儀 肺功能分析儀 肺量計

"Introduction：

The Spirometer is a portable device for testing pulmonary function, it adopts differential pressure acquisition principle to measure over 100 parameters related to FVC, VC, MVV and MV functions. It can be used in many scenarios, such as hospital, clinic, family, MVV and provocation test before / after medication, etc. which can provide the test results of pulmonary function for the users and the basis for the medical staff to make diagnosis.

Function：

1) Differential pressure detection technology, with a professional lung function software, which can measure over 100 parameters related to FVC, VC, MVV and MV functions.

2) Measure inspiratory and expiratory parameters, real-time curve display.

3) BTPS correction function, measure temperature, humidity and barometric pressure automatically.

4) Quality control function, automatic QC rating.

5) Calibration control function: volume calibration, three flows verification.

6) Display the optimal value from many measurements.

7) The tester condition can be reflected by the ratio of the measured value and the predicted value.

8) Flow-volume and volume-time curve

9) Data memory, delete and information review functions.

10) Trend chart display.

11) Prompt functions for over-limit of volume and flow.

12) Rechargeable lithium battery, with charging prompt.

13) Battery power indication.

14) Built-in multiple predicted values.

15) Support bronchial dilation / provocation test.

16) Pulmonary function assessment.

17) Follow-up questionnaires function.

18) Patient information can be entered, managed and queried.

19) The test report can be printed and output by the built-in 210mm thermal printer.

20) The external printer can be connected to print and output the test report.

21) 10.1"" capacitive touch screen.

22) Wi-Fi function.

23) Built-in ID card reader (optional).

Performance：

Display mode: 10.1"" color LCD

Display resolution: 1280 * 800

Volume range: 0 L ~ 10 L (BTPS)

Volume accuracy: ± 3 % or ± 0.05 L (whichever is greater)

Flow range: 0 L/s ~ 16 L/s (BTPS)

Flow accuracy: ± 5 % or ± 0.17 L /s (whichever is greater)

Power consumption: P ≤ 150 V·A

Power supply: DC 14.8 V rechargeable lithium battery or AC220V 50Hz

Safety class: class I or internally powered equipment, type BF applied part

Features：

Beautiful appearance, concise and fashion.

Desktop design, firm and convenient to operate.

10.1"" capacitive touch screen.

Measure over 100 parameters related to FVC, VC, MVV and MV functions.

The test report can be printed and output by the built-in 210mm thermal printer.

Wi-Fi function.

Built-in ID card reader (optional).

With the functions of QC rating, calibration verification, bronchial dilation or provocation test, pulmonary function assessment, follow-up questionnaires, etc.

Patient information can be entered, the predicted value can be calculated by the internal formula, and the ratio of the measured value and the predicted value can be calculated. Several predicted value formulas are optional.

Physical characteristic：

Dimension: 340 mm (L) × 320 mm (W) × 86 mm (H)

Weight: about 4000g

Package included:

1X SP100B Spirometer

1X Pulmonary function probe

100X Mouthpieces (round: 50, flat: 50)

1XCord set

1XRecording paper

1X Earth line

1XUser Manual

1XNose clip (optional)

Environment requirements

Operating environment

Temperature: + 10 ℃ ~ + 40 ℃

Relative humidity: 25 % ~ 80 %

Atmospheric pressure: 700 hPa ~ l060 hPa

Specific EMC, climate, mechanical environment:

Please use the device within the required altitude, temperature and humidity range. When the device is carried from cold environment to warm or humid environment, please do not use it immediately.

Do not use the device in environment with strong electromagnetic interference, direct breeze source, cold source or hot source.

Storage environment:

Temperature: - 20 ℃ ~ + 55 ℃

Relative humidity: ≤ 95 %

Atmospheric pressure: 500 hPa ~ l060 hPa

Specific EMC, climate, mechanical environment: the packed device should be stored in room with no corrosive gases and good ventilation. Temperature: - 20 ℃ ~ +55℃, relative humidity: ≤ 95 %. During transport, avoid strong shock, vibration and splashing with rain or snow."